Fagor NV20

Supply voltage with
surge protection
Universal with mains input range between
100 V and 264 Vac (±10%);
Frequency 45Hz to 400Hz
Working temperature From 5ºC to 45ºC (from 41ºF to 113ºF)
Storage temperature From -25ºC to 70 ºC (from -13ºF to 158ºF)
Relative humidity Maximum 95% non condensing 45ºC (113ºF)
Seal Front panel IP54 and rear panel, IP4X (DIN 40050)
This product meets the Safety and
Electromagnetic Compatibility
regulations
EN-60204-1, EN-50081-2, EN 55011, EN-55022,
EN-50082-2, EN-610004-2, 3, 4, 5, 6, 11,
EN-V50140, EN-V50141, ENV 50204
and European Union regulations 73/23/ECC,
89/392/CEE, 89/336/ECC and 73/23/EEC
Feedback signal type TTL 0-5 VDC ±5%
• Differential TTL 0-5 VDC ±5%
• Only on models ending in "1":
Voltage modulated differential sinusoidal 0-5V
(1Vpp + 20%-40% with a load of 120 Ohm)
• Other signal types through an adapter (consult)
Maximum feedback
signal frequency
250 KHz

Fagor NVP 200

The “NVP 200/201 QC” makes it possible to turn a simple profile projector or microscope into a powerful automatic measuring (fiber optic) and 2D calculating machine.

As well as offering basic measurement and calculation features for lines, circles, distances and angles, the NVP 200 QC also offers powerful features such as:

  • Tolerance control
  • Statistic process control of
    a series of measurements
  • Optionally: fiber optic
    connection

Fagor-10i-E

Digital readouts for EDM and Grinders: E series

  • 6 digital output
  • 4 digital inputs
  • Electrode length compensation
  • Linear and angular encoders
  • Travel limit alarm
  • LED display
  • Zero setting of the axes
  • Hysteresis factor
  • EDM mode

table 1

Fagor-20i T

2-axis DRO for lathes: Innova 20i T

  • Preset function
  • Absolute, Incremental and Io reference (home) signals
  • Resolutions from 0.1 microns on
  • Feedrate and movement alarms
  • Axis coupling
  • Hysteresis factor
  • Linear axis sag compensation
  • Calculator function
  • Easy setup and diagnosis
  • Energy saving mode
  • Software limits
  • Multi-point compensation
  • PC communication through a USB adapter
  • Taper calculation
  • Z axis coupling
  • Up to 20 tool references
  • Preset in HOLD mode
  • CE and UL certified

table 2

 

Fagor-20i-E

Digital readouts for EDM and Grinders: E series

  • 6 digital output
  • 4 digital inputs
  • Electrode length compensation
  • Linear and angular encoders
  • Travel limit alarm
  • LED display
  • Axis coupling
  • Zero setting of the axes
  • Hysteresis factor
  • EDM mode

table 1

 

Fagor-30i T

3-axis DRO for lathes: Innova 30i T

  • Preset function
  • Absolute, Incremental and Io reference (home) signals
  • Resolutions from 0.1 microns on
  • Feedrate and movement alarms
  • Axis coupling
  • Hysteresis factor
  • Linear axis sag compensation
  • Calculator function
  • Easy setup and diagnosis
  • Energy saving mode
  • Software limits
  • Multi-point compensation
  • PC communication through a USB adapter
  • Taper calculation
  • Z axis coupling
  • Up to 20 tool references
  • Preset in HOLD mode
  • Axis feedrate display
  • CE and UL certified

table 2

 

Fagor-30i-E

Digital readouts for EDM and Grinders: E series

  • 6 digital outputs
  • 4 digital inputs
  • Electrode length compensation
  • Linear and angular encoders
  • travel limit alarm
  • LED display
  • axis coupling
  • zero setting of the axes
  • hysteresis factor
  • EDM mode
  • Bolt-hole drilling
  • Linear drilling
  • Hold

 

 

table 1

Fagor-40i-TS

DRO for up to 4 axes lathes: Innova 40i-TS

  • Preset function
  • Absolute, Incremental and Io reference (home) signals
  • Resolutions from 0.1 microns on
  • Feedrate and movement alarms
  • Axis coupling
  • Hysteresis factor
  • Linear axis sag compensation
  • Calculator function
  • Easy setup and diagnosis
  • Energy saving mode
  • Software limits
  • Multi-point compensation
  • PC communication through a USB adapter
  • Taper calculation
  • Turning
  • Facing
  • Assisted threading (easy threading)
  • Z axis coupling
  • Up to 100 tool references
  • Preset in HOLD mode
  • Go to a particular position
  • Axis feedrate display
  • On-screen guided help, with graphics
  • CE and UL certified
  • 5.7″ color TFT screen
  • Constant Surface Speed (CSS)
  • Special inputs: Emergency input, analog input for the potentiometer, external push buttons (M3, M4, Stop, etc.)
  • Analog and digital outputs
  • It admits an encoder at the spindle

 

Fagor-Innova 20i

  • Preset function
  • Absolute, Incremental and Io reference (home) signals
  • Resolutions from 0.1 microns on
  • Feedrate and movement alarms
  • Axis coupling
  • Hysteresis factor
  • Linear axis sag compensation
  • Calculator function
  • Easy setup and diagnosis
  • Energy saving mode
  • Software limits
  • Multi-point compensation
  • PC communication through a USB adapter
  • Taper calculation
  • Z axis coupling
  • Up to 20 tool references
  • Preset in HOLD mode
  • CE and UL certified

Fagor-Innova 30i

  • Preset function
  • Absolute, Incremental and Io reference (home) signals
  • Resolutions from 0.1 microns on
  • Feedrate and movement alarms
  • Axis coupling
  • Hysteresis factor
  • Linear axis sag compensation
  • Calculator function
  • Easy setup and diagnosis
  • Energy saving mode
  • Software limits
  • Multi-point compensation
  • PC communication through a USB adapter
  • Bolt-hole drilling
  • Linear drilling calculation
  • Tool radius compensation
  • Part centering
  • Up to 20 tool references
  • Part alignment
  • Corner rounding/machining of arcs
  • CE and UL certified

Fagor-Innova 40i

DRO for grinders and general purpose applications: Innova 40i

  • Preset function
  • Absolute, Incremental and Io reference (home) signals
  • Resolutions from 0.1 microns on
  • Feedrate and movement alarms
  • Axis coupling
  • Hysteresis factor
  • Linear axis sag compensation
  • Calculator function
  • Easy setup and diagnosis
  • Energy saving mode
  • Software limits
  • Multi-point compensation
  • PC communication through a USB adapter
  • Go to a particular position
  • Axis feedrate display
  • On-screen guided help, with graphics
  • CE and UL certified
  • 5.7″ color TFT screen

table 2

Linear and angular encoders for CNC Machines and High Accuracy Applications (Absolute)

Linear Encoders

Fagor Automation uses two measuring methods in their absolute linear encoders:

•  Graduated glass: Linear encoders with a measuring length of up to 3040 mm.
•  Graduated steel: Linear encoders with a measuring length over 3040 mm.

Angular and Rotary Encoders Fagor Automation uses the graduated glass measuring method in their absolute angular and rotary encoders.

This measuring method has two different graduations:

• Incremental graduation: Used to generate square incremental signals for systems that use digital position input and are counted internally by the reader head. Alternatively 1 Vpp analog signal is also produced based on the system requirement.
•  Absolute graduation: It is a unique binary code which is imprinted along the measuring length of encoder.

linear absolute Absolute rotary