file201402181300 – Installing a Fagor Scale MVX-1020 in Hyundai-Kia Machine Center VX950MH with Fanuc 18-i-MB to replace Sony CN33
Installing a Fagor Scale in Hyundai-Kia Machine Center VX950MH with Fanuc 18-i-MB
Problem : Existing Sony CH33 magnetic scale with CN33 converter with plug PCR-E20FS Honda connector, having problem of unable to reference search.
CNC : Fanuc 18i-MB
Replacement with Fagor MVX-1020 linear scale.
After configuring the CNC parameter and connecting the scale with the Honda 20pin connector, the machine is working well again.
This is one of our typical job and it is professionally installed.
Professional installed by Measurite Pte Ltd
Tel : +65-67415851
Posted 18th February by Measurite Pte Ltd
Ball Bar Calibration – Machining Center – Doosan VR700 with Fanuc 0-MC in Singapore with Renishaw QC10 / QC20W
Ball Bar calibration to check the roundness of the Machining Center – Doosan VR700 with Fanuc 0-MC
Machine : Machining Center – Doosan VR700
CNC : Fanuc 0-MC
Ball Bar Check is done in Singapore
Ball Bar Check is done on Machining Center – Doosan VR700 using Renishaw Ball Bar QC10 / QC20W.
Ball Bar Check is done by Measurite Pte Ltd
Measurite – We Measure it Right
We provide services:
1) Renishaw Laser Calibration on Machines using Renishaw ML10 / Renishaw XL80
2) Linear Pitch Compensation on Machines
3) Ball Bar Check / Compensation on Machines using Renishaw Ball bar QC10 / Renishaw QC20W
Ball Bar Calibration – Rofin-Sinar Laser Cutting Machine – Laser Comb 1700SM with Bosch CNC CC220/320M
Ball Bar Calibration - to check the roundness of the laser cutting machine
Machine : Rofin-Sinar Laser Cutting Machine – Laser Comb 1700SM
CNC : Bosch CNC CC220/320M
Ball Bar Check is done on the Rofin-Sinar using Renishaw Ball Bar QC10 / QC20W.
The table is 2100 x 1500mm
Ball Bar Check is done by Measurite Pte Ltd
Laser Calibration and Ball Bar Check – Machine Pitch Error Compensation – Mitsui Seiki HU63A Horizontal Machine center with Fanuc 15M
Laser Calibration – Machine Pitch Error Compensation – Mitsui Seiki HU63A Horizontal Machine center with Fanuc 15M
Machine : Mitsui Seiki HU63A Horizontal Machine center
CNC : Fanuc 15M
Linear Pitch Error Compensation has been checked and compensated on Mitsui Seiki HU63A Horizontal Machine center using Renishaw ML10 Gold Laser.
Ball Bar checking has been done to check the interpolation between the 2 axis to check for circularity.
It has been checked with Renishaw Ball Bar QC10 system.
Laser Check and Ball Bar check is done by Measurite Pte Ltd
Laser Calibration – Machine Pitch Error Compensation – OKUMA MC-V3016 VMC with OKUMA E100 with Renishaw ML10 Gold
Laser Calibration – Machine Pitch Error Compensation – OKUMA MC-V3016 VMC with OKUMA E100 with Renishaw ML10 Gold
Machine : OKUMA MC-V3016 VMC
CNC : OKUMA E100
Linear Pitch Error Compensation has been checked and compensated on OKUMA MC-V3016 using Renishaw ML10 Gold Laser.
There are 3 axis XYZ was laser checked with the Renishaw ML10 Gold Laser.
It is a small and compact machine, with a Rotary axis A.
Laser Check is done by Measurite Pte Ltd
Laser calibration and ball bar check for Haas VF5B/40 machine center with Haas Controller
DRO and Linear Scale – Anilam / Acu-rite Wizard W411 on 4metre Lathe
DRO and Linear Scale – Anilam / Acu-rite Wizard W411 on 4metre Lathe
DRO : Anilam / Acu-rite (Acurite) Wizard W411 DRO
Machine : Conventional 4000mm Lathe
This is one of our typical job and it is professionally installed.
Professional installed by Measurite Pte Ltd
Linear Scale -Heidenhain Precision Linear Glass Scale LB301 – on Mario VTL with Fanuc CNC 18T
Linear Scale -Heidenhain Precision Linear Glass Scale LB301 – on Mario VTL with Fanuc CNC
Machine : Mario VTL
CNC : Fanuc 18T
Heidenhain Linear Scale, LB301 is unable to read at certain position.
This cause an error on the Fanuc CNC 18T.
A replacement is done on the Machine and the Heidenhain scale LB301 was replaced.
A laser check was done to determine the new pitch error on the Mario VTL machine using Renishaw ML 10 Gold.
Laser Check is done by Measurite Pte Ltd
Machine Service – INA RUS26102 Linear Roller Bearing – Berthiez VTL with Fagor CNC8055TC
Machine Service – INA RUS26102 Linear Roller Bearing – Berthiez VTL with Fagor CNC8055TC
Machine : Berthiez VTL
CNC : Fagor CNC 8055 TC
There is a problem in the Z axis slide. There is a jerk detected at 90mm whenever the Z axis move in the reverse direction.
The problem is determine to be the damage linear roller bearing from INA RUS26102.
The whole slide was dismantled and taken down.
Prior to that, the Fagor Linear Scale , CX glass scale has to be removed, followed by Fagor FXM servo motor.
After they are stripped off, the damage was checked and the bearing are replaced.
The Z axis was then assembled and checked using a Granite square block for squareness.
Finally, a Laser check to determine the pitch error using Renishaw ML10 Gold was carried out.
Machine repair is done by Measurite Pte Ltd
MPG -Fanuc A20B-1004-016 / A860-0203-T001 MPG Handwheel on Leadwell V40 VMC
MPG -Fanuc A20B-1004-016 / A860-0203-T001 portable MPG Handwheel on Leadwell V40 VMC with Fanuc CNC
Measurite Pte Ltd is able to service and replace all brands of faulty MPG or Handwheel.
The type of Handwheel that we have replaced are Nemicon, Tosoku, Hauto, Sumtak, Futurelife.
All type of CNC are compatible, Fanuc, Siemens, Mitsubishi, Heidenhain, Mazak, Okuma, Tosnuc, Makino, etc.
Just give us a call +65-67415851 if you have MPG/Handwheel problem.
MPG -HP-102-(40)-Z9 Handy Pulser portable MPG Handwheel on Makino Professional 3 VMC
The MPG -HP-102-(40)-Z9 Handy Pulser portable MPG Handwheel on Makino Professional 3 VMC is faulty.
The faulty Handy Pulser HP-102 portable MPG Handwheel is replaced with a Futurelife MPG mode HDW.
Measurite Pte Ltd is able to service and replace all brands of faulty MPG or Handwheel.
The type of Handwheel that we have replaced are Nemicon, Tosoku, Hauto, Sumtak, Futurelife.
All type of CNC are compatible, Fanuc, Siemens, Mitsubishi, Heidenhain, Mazak, Okuma, Tosnuc, Makino, etc.
Just give us a call +65-67415851 if you have MPG/Handwheel problem.
MPG -YOUNG CHANG portable MPG Handwheel on DOOSAN VMC with Fanuc 18i-MB CNC
MPG -YOUNGCHANG (YOUNG CHANG) portable MPG Handwheel on DOOSAN VMC with Fanuc 18i-MB CNC
The faulty YOUNG CHANG portable MPG Handwheel is replaced with a Futurelife MPG mode HDW.
Measurite Pte Ltd is able to service and replace all brands of faulty MPG or Handwheel.
The type of Handwheel that we have replaced are Nemicon, Tosoku, Hauto, Sumtak, Futurelife.
All type of CNC are compatible, Fanuc, Siemens, Mitsubishi, Heidenhain, Mazak, Okuma, Tosnuc, Makino, etc.
Just give us a call +65-67415851 if you have MPG/Handwheel problem.
MPG -Metronix Mecapion SPM-S06-B-LM3-ip65 portable MPG Handwheel on Hankook Lathe
Metronix Mecapion SPM-S06-B-LM3-ip65 portable MPG Handwheel
The MPG on Hwa Cheon Mega-95 Lathe is faulty.
The faulty Metronix Mecapion SPM-S06-B-LM3-ip65 portable MPG Handwheel is replaced with a Futurelife MPG mode HDW.
Measurite Pte Ltd is able to service and replace all brands of faulty MPG or Handwheel.
The type of Handwheel that we have replaced are Nemicon, Tosoku, Hauto, Sumtak, Futurelife.
All type of CNC are compatible, Fanuc, Siemens, Mitsubishi, Heidenhain, Mazak, Okuma, Tosnuc, Makino, etc.
Just give us a call +65-67415851 if you have MPG/Handwheel problem.
DRO – FAGOR NV20 on Microweily TY-1640S Lathe
Installed the FAGOR NV20 on Microweily TY-1640S Lathe
The X scale is specially protected from coolant and chips using our own designed scale N-type casing.
This is one of our typical job and it is professionally installed by Measurite Pte Ltd
Machine : Microweily TY1640S Lathe
DRO used : FAGOR NV20 DRO
Scale : Fagor MT Scale
DRO – TECH DRO-2M on Microweily TY-1640S Lathe
Installed the TECH DRO-2M on Microweily TY-1640S Lathe
The X scale is specially protected from coolant and chips using our own designed scale N-type casing.
This is one of our typical job and it is professionally installed.
Machine : Microweily TY1640S Lathe
DRO used : TECH DRO-2M
Retrofit : Schiess Froriep 14Dke VTL with Fagor 8055TC CNC
This retrofitting project of the Schiess Froriep 14Dke VTL involves :
a) assembly of the VTL,
b) replacement of the X and Z servo motor and drive, AXD digital servo drive with FXM servo motor
c) replacement of the spindle motor and drive, to Fagor SPD drive FM7 spnidle motor
d) replacement of the complete electrical cabinet,
e) replacement of the CNC controller to Fagor 8055TC CNC
f) replacement of the PLC circuitry
g) renishaw ML10 gold laser calibration for pitch error compensation
MPG – Futurelife Technologies – model HDW EHDW NHDW handwheel Manual Pulse Generator
MPG – Futurelife Technologies – model HDW EHDW NHDW handwheel Manual Pulse Generator
These Futurelife Manual Pulse Generator (MPG) Handwheel are widely used in most Taiwanese CNC machine.
They suits all model of CNC, Fanuc, Siemens, Mitsubishi, Num, Fagor, Heidenhain, Mazak, Okuma, Tosnuc, Makino etc.
MPG – Nemicon Handwheel catalog : Nemicon HP-L series and UFO series
MPG – Nemicon Handwheel catalog : Nemicon HP-L series and UFO series
Very widely used MPG, often rebrand as under the machine OEM name.
Fanuc is using the UFO model widely for their machine.
MPG – Sumtak MPG LGT Model Handwheel catalog
Catalog of Sumtak LGT Model Handwheel MPG.
MPG – Tosoku MPG Catalog – HC1 series
MPG – Tosoku MPG Catalog – HC1 series
MPG – Tosoku MPG handwheel HC115 on Dah Lih VMC
The MPG on DAH LIH VMC is faulty.
The faulty Tosoku HC115 MPG is replaced with a Futurelife MPG mode HDW.
Measurite Pte Ltd is able to service and replace all brands of faulty MPG or Handwheel.
The type of Handwheel that we have replaced are Nemicon, Tosoku, Hauto, Sumtak, Futurelife.
All type of CNC are compatible, Fanuc, Siemens, Mitsubishi, Heidenhain, Mazak, Okuma, Tosnuc, Makino, etc.
Just give us a call +65-67415851 if you have MPG/Handwheel problem.
MPG – Tosoku HC121 Handwheel on Mazak Mazatrol M Plus CNC
Replacement of MPG on Mazatrol M Plus CNC.
The current MPG is a Tosoku HC121, we had replaced it with a Futurelife MPG.
DRO – Sony LH51 Digital ReadOut on Spark Double Column VTL Machine
This machine is using one Scale with 2 reading head/sensor on the X axis.
Machine : Spark VTL (www.sparkcnc.com)
Machine type : Double Column VTL
DRO : Sony
Model : Sony LH51 DRO
Laser Calibration – Machine Pitch Error Compensation – Takisawa TNL 1000D Horizontal Lathe with Fagor NV20 DRO
Laser Calibration – Machine Pitch Error Compensation – Takisawa TNL 1000D Horizontal Lathe with Fagor NV20 DRO
Machine : Takisawa TNL 1000D Horizontal Lathe
DRO : Fagor NV20 DRO
Linear Pitch Error Compensation has been checked and compensated on The Takisawa TNL 1000D Horizontal Lathe using Renishaw ML10 Gold Laser.
This is a small lathe, travel is about 1000mm so there are 2 axes to be laser check with the Renishaw ML10 Gold Laser.
Laser Check is done by Measurite Pte Ltd
Laser Calibration – Machine Pitch Error Compensation – Leblond Makino Regal 19″ Lathe with Fagor NV20 DRO
Laser Calibration – Machine Pitch Error Compensation – Leblond Makino Regal 19″ Lathe with Fagor NV20 DRO
Machine : Leblond Makino Regal 19″ Lathe
DRO : Fagor NV20 DRO
Linear Pitch Error Compensation has been checked and compensated on the Leblond Makino 19″ Regal Lathe using Renishaw ML10 Gold Laser.
This is a long lathe with Z travel of about 1500mm, there are 2 axis to be laser check with the Renishaw ML10 Gold Laser.
Laser Check is done by Measurite Pte Ltd
Ball-Bar Calibration -Mazak Integrex 300-IV Slant bed Lathe – Mazak Mazatrol Matrix CNC
Ball Bar Calibration – Mazak Integrex 300-IV Slant bed Lathe – Mazatrol Matrix CNC
Machine : Mazak Integrex 300-IV Slant bed Lathe
CNC : Mazak Mazatrol Matrix CNC
Ball Bar is used to check the X and Z axis interpolation using Renishaw QC10 Ball Bar system.
Ball Bar Calibration is done by Measurite Pte Ltd
Ball-Bar Calibration – Hankook Protec-9NC Horizontal Lathe with Fanuc 21i-TB CNC
Ball Bar Calibration – Hankook Protec-9NC Horizontal Lathe with Fanuc 21i-TB CNC
Machine : Hankook Protec-9NC Horizontal Lathe
CNC : Fanuc 21i-TB CNC
Ball Bar is used to check the X and Z axis interpolation using Renishaw QC10 Ball Bar system.
Ball Bar Calibration is done by Measurite Pte Ltd
Laser Calibration – Machine Pitch Error Compensation – Kellenberger 600U CG Grinder with Anilam Wizard 311
Laser Calibration – Machine Pitch Error Compensation – Kellenberger 600U CG Grinder with Anilam Wizard 311
Machine : Kellenberger 600U CG Grinder with Anilam Wizard 311
DRO : Anilam Wizard 311
Linear Pitch Error Compensation has been checked and compensated on The Kellenberger 600U CG Grinder using Renishaw ML10 Gold Laser.
The machine is very accurate and the DRO offers a linear error compensation (LEC).
Laser Check is done by Measurite Pte Ltd
Laser Calibration – Machine Pitch Error Compensation – Deckel FP3LG Milling
Machine with Heidenhain DRO
Laser Calibration – Machine Pitch Error Compensation – Deckel FP3LG Milling Machine with Heidenhain DRO
Machine : Decekel Milling Machine FP3LG
DRO : Heidenhain DRO
Linear Pitch Error Compensation has been checked and compensated on The Deckel FP3LG Milling Machine using Renishaw ML10 Gold Laser.
The X, Y and Z axis was laser check with the Renishaw ML10 Gold Laser.
The longest travel is about 550mm.
Laser Check is done by Measurite Pte Ltd
Laser Calibration – Weiler E30 CNC Lathe with Siemens Sinumerik CNC 840D – Machine Pitch Error Compensation
Laser Calibration – Machine Pitch Error Compensation
Machine : Weiler E30 CNC Lathe
CNC : Siemens Sinumerik CNC 840D
Linear Pitch Error Compensation has been checked and compensated on The Weiler E30 Lathe using Renishaw ML10 Gold Laser.
This is a small but accurate machine made in Germany. There are 2 axis to be laser check with the Renishaw ML10 Gold Laser.
The longest travel is about 450mm.
Laser Check is done by Measurite Pte Ltd
Laser Calibration – Machine Pitch Error Compensation – Torni Tacchi HD/3 90H CNC Lathe with Siemens Sinumerik CNC 840D
Machine : Torni Tacchi HD/3 90H Lathe
CNC : Siemens Sinumerik CNC 840D
Linear Pitch Error Compensation has been checked and compensated on The Tcchi Lathe using Renishaw ML10 Gold Laser.
There are 2 table saddle, which is a unique setup, so there are 4 axis to be laser check with the Renishaw ML10 Gold Laser.
The longest travel is about 5m.
Laser Check is done by Measurite Pte Ltd
